Bench type hydraulic pressure pump
Type hydraulic pressure pump (hereinafter referred to as the pressure pump) is an important auxiliar…
Description：
Products overview:
ZW-YFT2002 seriesDesktop hydraulic pressure pump(hereinafter referred to as pressure pump) is an important auxiliary equipment in pressure meter test, cooperate with standard pressure, pressure meter calibration and testing work.Pressure pump quality of imported hydraulic pump as the pressure parts, supplemented by well-designed fine-tuning, fast interface, simple operation, reasonable structure, good sealing performance quality wide range of pressure generation system, can be widely used in measurement, scientific research, industrial and mining enterprises, instrument manufacturing industry, etc.
Second,ZW-YFT2002 seriesDesktop hydraulic pressure pumpProduct features:
1, USES the food grade stainless steel, military sealing technology
2, high accuracy of pressure control, smooth booster, the operation is simple
3, high pressure range and thin air
4, wide tuning range, high stability
Three, desktop hydraulic pressure pump installation dimensions:
450mm x370mm x 145mm
Weight: 6 kg
O ring, MF30 (Φ 9 * 2.67)
Second,ZW-YFT2002 seriesDesktop hydraulic pressure pumpProduct features:
1, USES the food grade stainless steel, military sealing technology
2, high accuracy of pressure control, smooth booster, the operation is simple
3, high pressure range and thin air
4, wide tuning range, high stability
Three, desktop hydraulic pressure pump installation dimensions:
450mm x370mm x 145mm
Weight: 6 kg
O ring, MF30 (Φ 9 * 2.67)
Four, desktop technology parameters of the hydraulic pressure pump:
1, scope of pressure:
ZW-YFT2002A 0~40.0MPa
ZW-YFT2002B 0~60.0MPa
ZW-YFT2002C 0~100.0MPa
ZW - YFT2002Q 0 ~ 70 mpa (medium for water)
2, adjust the sensitivity: min 10 pa
3, appearance size: 400 * 360 * 160 (length x width x height)
4, weight:
ZW-YFT2002A 4kg
ZW-YFT2002B 5kg
ZW-YFT2002C 6kg
ZW-YFT2002Q 6kg
Serial number | The name of the | function |
1 | The output of 2 | Connection standard table or be inspection table |
2 | Voltage regulator valve | The output pressure is unstable locking, insurable pressure stable |
3 | Thin air valve | When making pressure lock, open when back pressure |
4 | leverage | By manipulating the piston movement |
5 | Oil storage chamber | Storage (silicone) is commonly used in liquid pressure |
6 | Relief port | Play open gas injection liquid |
7 | fine-tuning | Small increase or decrease pressure |
8 | Output 1 | Connection standard table or be inspection table |
9 | The pump's total into | The combination of different parts installation body |
10 | Lever lock | Pull out or back to the fixed lever lock state |
11 | Pour the mouth | Add (change) the test medium |
Five, the operation and use:
1, is routine test
Open output, output 1 2 plug, open the regulator valve, the fine will be dispatched to the appropriate position lock in thin air valve, operating leverage to guide pressure liquid gently to the outlet, installation standard table and be the school table, near the operating leverage booster to check point, with fine-tuning approximation check point, point by point detection to the full range.
2, return test
According to the procedures after the full ride two readings, gently with fine-tuning step-down to check point, point by point detection, until zero, when operating fine-tuning cannot step-down, gently open the drain valve empty step-down.
High pressure condition, when the pressure slowly decline, can lock voltage regulator valve.
Six, note:
1, the pressure pump should choose flat, easy to operate mesa place, avoid getting into a high environment of corrosive gas and dust particles.
2, checked the instrument should make appropriate cleaning, avoid the stain into the detection circuit.
3, output 1, 2 output for special fast interface, end face seal, the installing a instrument, without using any tools, cut and forcibly tighten, around the seal face with each other, then fix 2 ~ 3 laps.
4, check the locking nut, connection is strong, the connection is unreliable, when in high pressure, could cause a collapse.
5, when lever made heavier pressure, with fine-tuning booster is easier.
Product warranty and after-sales service:
ZW series - YFT2002 pressure pump products quality assurance period for 12 months, life-long maintenance.Warranty period for the damage, free maintenance, more than warranty, maintenance fee and shipping fee only.To new users first use, generally by the menu function prompts the operation, there are technical difficulties, please call the company technical department to give answers.Company can send engineers to the scene guidance when necessary.
ZW series - YFT2002 pressure pump products quality assurance period for 12 months, life-long maintenance.Warranty period for the damage, free maintenance, more than warranty, maintenance fee and shipping fee only.To new users first use, generally by the menu function prompts the operation, there are technical difficulties, please call the company technical department to give answers.Company can send engineers to the scene guidance when necessary.
Browse：
On A：No
Next：Bench type pneumatic pressure pump
